FAQ Mood
The Mood case supports up to 280 mm radiators with a max width of 148 mm (relevant for 140/280 radiators). There are however some restrictions in terms of l...
Tue, 18 Jun, 2024 at 2:47 PM
The Mood has a separate chamber for the GPU, meaning that the measurements below are static and will not be affected by other components: Maximum G...
Tue, 18 Jun, 2024 at 4:32 PM
The maximum CPU cooler height in the Mood is 114 mm. Note however that if installing a fan in the front of the case on the lower fan slot, you would need to...
Tue, 18 Jun, 2024 at 2:47 PM
Mood supports SFX and SFX-L power supplies with a maximum length of 130 mm with an additional 30 mm of space for the cable connectors installed. As the pow...
Tue, 18 Jun, 2024 at 2:47 PM
The case comes with one 3.5" bracket and two 2.5" brackets. The 3.5" bracket is pre-installed on the front fan bracket of the case while...
Tue, 18 Jun, 2024 at 2:47 PM
For the outer fabric, we recommend using a lint roller to remove dust and particles. The rear panel of the case has a magnetic dust filter which ca...
Tue, 18 Jun, 2024 at 2:47 PM
When in stalling the Lumen S28, or similar AIO, into the Mood it is best to follow this guide. 1.) Make sure the tubes on the CPU block are facing up to...
Wed, 26 Jun, 2024 at 4:33 PM